TEXAS HOT RODS Group Buy on the Saleen 99-04 4.6 SUPERCHARGER KIT!

I've discussed a special group buy with Saleen on the very popular Series IV kit and we're a go! I was assured that if we can make it happen, they'll get the production together for THR.

So here she is, folks! We have an incredible price together for the COMPLETE SALEEN SERIES IV KIT for 99-04 4.6 MUSTANGS! This would be shipped to the 48 STATES. WE WILL EXTEND THE DISCOUNT TO CANADA AND INTERNATIONALLY simply for the extra cost of shipping!!!

NEW NOTE!! SALEEN JUST TOLD ME WE NEED TO GET AN ORDER IN BY FRIDAY IN ORDER TO HOLD THE STOCK FOR US! PLEASE GET YOUR ORDERS IN NOW IF YOU'D LIKE TO GET THIS SPECIAL PRICE!!

99-04 Saleen Series IV Supercharger
Part Number: 10-1607-B11250*
For maximized power output from your 4.6L Mustang. Saleen Series IV Supercharger Kit, a screw type unit, includes the Saleen Series IV Blower, Intercooler, Heat Exchanger, 30 lb/hr Injectors, Intake, Computer Reflash and all hardware, providing dramatic performance gains with drivability in both boosted and non-boosted conditions. Original equipment from 03-04 S281 Mustangs. Will fit 99-04 Mustang 2V 4.6.

http://www.saleen.com/sc101ServicesUserFiles/shopper/images/prod/178-613.jpg

QUESTIONS!

1) How do I get the price?
-- As you may know, Saleen will not allow us to post a discounted price. Please PM us at texashotrods, email sales@texashotrods.com or call us directly 915-593-6225. I will also give the pricing info to Hot Rods n' Booze, Amanda, and tripsevn. If you get our phone system leave us a message! It seems like when we have group buys like this our phones get overwhelmed. We WILL get back to you!

2) Is this everything I need to install?
-- Everything including instructions! It's all in one box!

3) What if I want THR to install?
-- We will offer special discounted INSTALLATION and DYNO TUNING for those of you who want to bring it to THR to install. We install what we sell, isn't that the only way it should be done? :)

4) How soon should I get the supercharger?
-- Right now the production completion date is July 26th. The THR group buy, according to Saleen, will be ready 7-10 days after that. It's a quicker turn around than a Procharger, and well worth the wait!

5) Where does my Supercharger come from?
-- Directly from Saleen Inc. in Cali. THR is a Master Distributor of Saleen. Check out our own personal Series VI we've listed on the forums.

6) Will this Supercharger ruin my motor?
-- NOPE! Saleen is conservative, and at about 9psi even stock engine won't have issues.

7) So what if I want to upgrade more than the Supercharger?
-- Give us a call! We'll extend discounting on ALL parts to Mustang Forums customers.

We're so excited to work w/ Mustang Forums. Thanks for giving us the opportunity and feel free to contact us with any questions!


http://www.saleen.com/sc101ServicesUserFiles/shopper/images/detail/178-613b.jpg

http://www.saleen.com/sc101ServicesUserFiles/shopper/images/detail/178-613c.jpg

Wish i could put one on mine... [:@]

sounds interesting, price?

Are they a roots type blower or screw? I can't tell the difference. Looks kinda small. Anyone know whats the max power output of one of those blowers?

ORIGINAL: Brute03

sounds interesting, price?



1) How do I get the price?
-- As you may know, Saleen will not allow us to post a discounted price. Please PM us at texashotrods, email sales@texashotrods.com or call us directly 915-593-6225. I will also give the pricing info to Hot Rods n' Booze, Amanda, and tripsevn. If you get our phone system leave us a message! It seems like when we have group buys like this our phones get overwhelmed. We WILL get back to you!


do you people even read?

a whopping 4psi? can you pulley these things to make it worth while?

crap! I totally missed that part, i'm too busy picturing it under my hood :D

haha.. i missed that too..

Anybody know what kind of power do they make with 4 psi? Can they be pulleyed to 12 psi?

not sure what they do on the 2Vs, but on the 3Vs at 4 PSI they are over or around the 400 rwhp mark.

Hey yall. I just called them. I don't think they'd be too happy if I posted the price publicly. But I must say....... WOW! Deffinatley worth to jump on it. But for those that are like me that are trying to think of a cheaper alternative to a KB 1.7. Hmmmmm. I'm going to wait and do my research a bit. I need to be 100 percent sure I can pull at least 11 psi from this unit and have her give my baby 450 or more horses.
But trust me. The ammout you save is well worth it. Enough dough to either buy you a Nitrous kit and add another 150 shot of Go Baby Go Juice. And on top of that change out your exhuast.

4psi![sm=laughat.gif]

as with any blower, you can do a pulley swap to increase boost, thus increasing power. the saleen blower is positive displacement which equals instant boost.

PM me the price my e-mail isn't working.

ORIGINAL: wwmost

4psi![sm=laughat.gif]


If 4psi is all it takes for me to get to 400. and 9 psi takes me to 450. I'll buy.

sometimes i hate having a sn95[&o]

Oh snap. I've been waiting for this. :D

The Series IV is a ROOTS design, it will produce 4 psi with the factory pulley. There is someone on the forums who has one, and he says it's a miracle he is above 400 RWHP with it. I believe there's something salvagable about the blower though and if I can max out the factory short-block with it, and the price is competitive, I'll be all over this. e-mailing to get a price now. :D

Can someone please PM me the price. I cannot make personal phone calls at work and my e-mail is down.

Thank you in advance

I wish I have more knowledge on this bower. :-( ANd I wish KB would have the same deal! The day the cut prices of a 1.7 kb down to the mid $3,000.00 and the 2.2 blowzillas down to what the 1.7s are now! I tell ya, I would skeet in my pants and divorce my wife if I had one at that point!. And smash every car headlight in my neighborhood!

Price is great! Would 4 psi even get you too 400 RWHP?? And i know this is going to sound dumb but do these superchargers have a "blow off" sound like turbos do??

ORIGINAL: The02GT

Price is great! Would 4 psi even get you too 400 RWHP?? And i know this is going to sound dumb but do these superchargers have a "blow off" sound like turbos do??


No it doesn't sound like turbos. Not to dissapoint you. The Cent superchargers are the only blowers that need a blowoff valuve I think. The manifold mounted blowers don't need them. But even then, it doesn't have distinct *ping* kinda sound to it. Which I think is annoying anyway.

centris use bypass valves, roots/screw blowers usually have a built in bypass. all turbo/blowers need some sort of bypass, unless running real low boost.

The price is amazing guys. I only wish I could have started working earlier in the summer so I could have the money right now to get this damn thing. :(

I'm kinda confused as to the kit setup.... THe upper intake arm.... It kinda extends out... I wonder if this system will still accept aftermarket CAI.

Does anyone know how long this deal is going to last??

The 400 rwhp was for the 3V's. So I guess that puts 2V's right around the 360 rwhp mark.... which is actually awesome for only 4 psi. OMG, what would 12 psi do!?!?!?!?! If someone would PM me the price, I would sure appreciate it.

Its not going to last long i can tell you this much. I want it so bad...... I cant stop thinking about it

what all is included in the kit?

I just got an email back! 129.00 for an upgraded pulley to come with the kit that adds around another 40 to 50 horses. The entire kit should come with everything you need. When its all said and done your engine will look very similar to that of a S281 Saleen. The only draw back to this kit that I can see...... What about the CAI? I not a big fan of the rubberised design of it. And I don't know of anything else that can be done with that. BUt the pulley upgrade will run you up to 9 psi. I think. So you are looking at a blower that is compareable to that of a KB. Although IMO I still think even the 1.7 KB will blow this blower away.
But with a FULL BOLT ON GT, and Fordged internals, and Cobra Fuel Pump, I'm willing to bet you can exceed the 475rwhp mark. I'll give it a few days thought.

ORIGINAL: nopropslaw

what all is included in the kit?


Everything! I have done a lot of research on the Series IV blower and can answer any questions anyone may have. You can PM them to me and I'll post the questions and answers here in the thread as well as reply to you.

I hope THR will extend this long enough for me. I'm trying to sell my 01 V10 excursion right now, after it's sold I'll have the funds freed up to be able to jump on this deal... I don't want to let this one pass me by [:@]

Edit: Just to give everyone an idea of the power output of this blower, it's PERFECT for a GT with stock internals, when you max out the boost and go with all the bolt-ons (pretty much just exhaust), you'll be at the limits of the stock internals... 425-450 RWHP. For the price, it's very nice too. Good to get for now, then if/when you rebuild your shortblock with forged internals you can add a 100-125 shot of the juice on top of this and be maxing out your new short block, while it's all very affordable.

Dammit, why can't they just extend this deal for hmm...let's say 9 months :D

ORIGINAL: so1o2k3

Dammit, why can't they just extend this deal for hmm...let's say 9 months :D


Or do a MustangForums.com discount code to get that price then post it on here.

Please check your PM! Thanks!

ORIGINAL: Brute03

sounds interesting, price?

Absolutely, we can add a pulley upgrade for $129!

Done! Thanks! sales@texashotrods.com should be working... sorry!
ORIGINAL: ASUSMC

PM me the price my e-mail isn't working.

ShadowDrake or texashotrods, what is the price? And what rwhp will it give my stock GT with 4 psi?

REMEMBER, we offer a THR CAR CARE ONE CARD with 90 days same as cash! After that any time you make a purchase over $500 it's always 90 days same as cash free! We can also offer up to one year same as cash with a small transaction fee.

You can apply on the website (bottom right) and fax in the app to us at 877-507-8264. PLEASE EMAIL OR PM us if you're sending in an APP so we can process it right away!

Thanks!

Lizzie

ORIGINAL: 2k1gt

The price is amazing guys. I only wish I could have started working earlier in the summer so I could have the money right now to get this damn thing. :(

We're going to continue the deal for at least one week, although if the orders keep coming we'll send in groups at a time (max discount is at 16 chargers at a time).

Thanks!

Lizzie
ORIGINAL: ASUSMC

Does anyone know how long this deal is going to last??

Gonna make this a sticky. GOOD LUCK THR.

could someone pm me the price? thanks

Are these the new Saleen superchargers I've been hearing about, or are they the older ones?

The Saleen supercharger comes with all mounting hardware including belt , brackets, idler pulleys. also includes heat exchanger intercooler, all the plumbing for air induction, includes the computer reflash, 30 lb injectors, and the intake manifold w/ the blower.


ORIGINAL: nopropslaw

what all is included in the kit?

That's awfully nice...we really appreciate the response already guys!!

ORIGINAL: code3GT

Gonna make this a sticky. GOOD LUCK THR.

Done!

ORIGINAL: axs377

could someone pm me the price? thanks

Can someone pm me the price also please?

Can a stock internal mustang hold the boost from the upgraded pulley without wear and tear to the engine? Has anyone got rwhp numbers for the 4 psi yet?

I think i am going to have to get one of these, where does the heat exchanger and intercooler mount? Whats the difference between the two??

Could someone also PM me the price on this?? Thanks for the help.

could someone pm me the price

could someone send me the price as well, I might jump on this band wagon.

could someone pm me the price to :D

Price PM's sent to help THR out. (I copied the e-mail you sent to me, if that's alright). I'll be jumping on this as soon as I can. :)

Damn the fee to get it for 12 months same as cash is almost $300, i might as well save up and pay the 4k for it vs almost paying the same amout to get it with their credit card!! But where exactly does the heat exchanger and intercooler go? I cant find any pics of it!!

ORIGINAL: The02GT

Damn the fee to get it for 12 months same as cash is almost $300, i might as well save up and pay the 4k for it vs almost paying the same amout to get it with their credit card!! But where exactly does the heat exchanger and intercooler go? I cant find any pics of it!!


The cooler is similar to that of the 03/04 Cobras. It sits in a bath of coolant just below the blower itself.

how do these compare to the other brands? anyone have any experience with one? Definitly a good deal from my researching. how are these different from the older model saleen chargers?

Appreciate it, thanks!

ORIGINAL: ShadowDrake

Price PM's sent to help THR out. (I copied the e-mail you sent to me, if that's alright). I'll be jumping on this as soon as I can. :)

Remember, 90 days same as cash is FREE, 6 months would be $150. If you have any special offers w/ any credit cards then you can transfer it after that time.

I can't quote but the savings are well over even the $300 for the whole year.

Thanks!

Lizzie



ORIGINAL: The02GT

Damn the fee to get it for 12 months same as cash is almost $300, i might as well save up and pay the 4k for it vs almost paying the same amout to get it with their credit card!! But where exactly does the heat exchanger and intercooler go? I cant find any pics of it!!

I am also interested. If I can pull some funds together this may be possible. Can I get the price pm'ed to me please? Thanks in advance.

so does the heat exchanger sit below the sc and the intercooler in front of the raidator??????????????

Would it fit under stock hood?

the heat exchanger is where the 03/04 cobra one is...behind the bumper. the blower will clear stock hoods.

Sounds radical, Someone pm me the price. Hooray for superchargers[sm=groupwave.gif]

Absolutely, it fits the stock hood.

ORIGINAL: Valek

Would it fit under stock hood?

could some one please pm me the price. thanks

if i could get a pm thatd be awesome!

damn if I hadn't bought my cell phone I would have had enough left on my credit card to buy this.. so looks like I won't be able to this time.

Pm me price please Thanks in advance

Price PM's taken care of again. :)

can i get apm on price too shadow?

I need a PM'd price as well.....if it not too much trouble....;)

HOLY SHYT! i need a pm of the price.....please someone? I am ready to buy asap

Oo I need a PM also...thanks!

i am still thinking about this!!! The guys in theis thread said it wont clear the hood (its a yr old) http://www.mustangforums.com/m_556282/mpage_1/key_/tm.htm#562356

Price PM's sent up till now, gonna take a break from it, I've easily sent over 20 PM's now [8D] If you want the price, do like I did and e-mail THR!

02GT, the guy in that thread who said it wouldn't fit under the stock hood was one of the guys who came in here asking if it would fit. Birdieman has some credit, but I do believe it will fit under the stock hood. It's a small blower. The Series V however, very likely not, but Saleen designed the Series IV kit for a stock 2v GT and when I was e-mailing them a while ago about it they said the kit has everything you need, nothing extra is necessary (meaning no need for a new hood).

Ok I was wondering before I make my final decision, what kind of MPGs are we looking at, would I be forced to use premium gas, and do I have to tap into the oil pan for this kit?

Ok guys i am tired of looking around trying to find pics but does anyone know where i can get pics of a complete install or pics of EVERYTHING that comes with the kit????????? I still dont understand how the heat exchanger and intercooler works on these cars!!! mhelp me out!

EDIT: just found some new info - So does the heat exchanger act as a raidator and a external water pump pushes the water through that and then to the intercooler which is mounted right under the s/c and the air from the s/c blows over the intercooler???????? Did i get that right? I would still like more pics if possible though! And what the small external mounted tank for? a resivior?

NEW NOTE GUYS!

Saleen told us that we need to get in the order by this upcoming Friday in order to hold stock (Saleen will hold them for THR if we have enough orders). Please get your orders in this week so we can have these superchargers available for you!

You are welcome to contact us anytime this weekend/throughout the week directly at 915-449-6224 (BRIAN). We can give you in depth info on these chargers, answer any questions you may have!

We've had some great response so far from everywhere as far as Canada and Puerto Rico, thanks everyone! I just want to make sure we don't run out of stock on these. If there are any people who haven't received a PM, send us one directly to texashotrods. Thanks again for the interest!

Would anyone be interested if we put a coupon code on www.TexasHotRods.com for the special price? If we did this we could actually have all your orders right there and trackable off the site directly. Our system automatically sends messages and tracking info. Let me know and I'll get the code up for Mustang Forums members.

Thanks!

Lizzie

It's about 1-2 less mpgs, yes you need to use premium gas, and NO you do not need to tap the oil pan to install.

Give us a call 915-449-6224 with any other questions!


ORIGINAL: ironh19

Ok I was wondering before I make my final decision, what kind of MPGs are we looking at, would I be forced to use premium gas, and do I have to tap into the oil pan for this kit?

ORIGINAL: The02GT

Ok guys i am tired of looking around trying to find pics but does anyone know where i can get pics of a complete install or pics of EVERYTHING that comes with the kit????????? I still dont understand how the heat exchanger and intercooler works on these cars!!! mhelp me out!

EDIT: just found some new info - So does the heat exchanger act as a raidator and a external water pump pushes the water through that and then to the intercooler which is mounted right under the s/c and the air from the s/c blows over the intercooler???????? Did i get that right? I would still like more pics if possible though! And what the small external mounted tank for? a resivior?


So is this info right guys? And does anyone have any more pics?

PM me the price please!!!!!!!!!

ORIGINAL: The02GT

So is this info right guys? And does anyone have any more pics?


Yes, you are correct... air-to-water cooling essentially. The setup is VERY similar to that on the 03/04 cobras.

So can i put my accufab 70mm t/b on it?? And is there a place to tap into on the s/c for a boost gauge?? And how much Whp will i see with 4 psi? with 9??

Im also wondering if u should up the injectors if you buy the other pulley. As well as how does this supercharger effect a automatic transmisson? Is it premium gas for the 4 psi or the faster pulley? Im pretty sure im going to get one. Have until thursday to talk myself into it and do my researching.And has anyone found out yet if the stock hood will work?

ORIGINAL: mustgt01

Im also wondering if u should up the injectors if you buy the other pulley. As well as how does this supercharger effect a automatic transmisson? Is it premium gas for the 4 psi or the faster pulley? Im pretty sure im going to get one. Have until thursday to talk myself into it and do my researching.And has anyone found out yet if the stock hood will work?


Stock hood will work, preimum fuel, up the injectors for the 9 psi pulley, dont know about the auto tranny part

YYYYEEESSSS!!!! I found a complete kit with 9k miles on it that i am most likly getting for, well if i told you guys you prob would get mad!!!!!

Could someone PM me the price please

I believe we've PM'd everyone up to here! Let us know if you haven't received it.

We have the instructions for installation of the kit, just PM us and we can send it to you!

Thanks!

Lizzie

Can you PM me with price as well, thanks!

PM me please! Thanks!

ORIGINAL: The02GT

So can i put my accufab 70mm t/b on it?? And is there a place to tap into on the s/c for a boost gauge?? And how much Whp will i see with 4 psi? with 9??


you can use the t/b last i checked, and the boost gauge gets tapped into any intake vacuum line. you should see at least 350 at the wheels.

I want this kit but they need to extend it another week!!!

I called and spoke with Brian at THR today and got answers to most of my questions. He said that it is an 8psi and that the optional pulley would take it to 12psi.

Thats what i thought stock boost IS 8 psi

Hi Guys!

We've had such a great response that we are at the next discount level that we quoted in the first quotes (those of you w/ only one price in the PM, that's the price)! Thanks so much for making this a great buy so far, and for any of you waiting, this is the time!

BTW, we can squeeze a few of these into the future if you let us know now. If we have any deposit, we can order it under the Group Buy. So for you guys who are looking for financing, we can offer the THR "layaway" program. We need a deposit to hold the chargers, and you can pay however you'd like. When it's paid in full it will ship.

We want to make this easy for Mustang Forums members, we think this is an awesome venue!

Just let us know!

Thanks!

Lizzie

can you please pm me the price. i am very interested

PM Sent!

Could I get a PM with the price please?

What is the max PSI i can run with this blower? i have full boltons. What kind of power can I squeeze out of this blower? Will I be able to make it past 500?

PM please.............:)

I'm also interested in this price, thanks.

can you please PM me the price?

Thanks

PM me also please!

SALE ENDS FRIDAY!!!

We are going to go ahead and extend the sale one week as we are getting such a strong response. Please note that the sale will close on this upcoming Friday, August 4th. If you are interested in the system please let us know by then. We're offering several incentives for interested buyers, including:

1) THR CAR CARE ONE CREDIT CARD - this card carries 0% financing for 90 days, and can be used over and over at THR w/ the same 90 days same as cash offer! To apply go to our website www.texashotrods.com, fill out the app, and fax to us at 877-507-8264.

2) LAYAWAY - for those that are interested but can't afford it, THR will order your charger upfront to secure the Group Buy price. Down payment required is $500, payment schedule based on your needs. When paid in full, we will ship the charger direct to your door!!

3) UPGRADED PULLEY - the upgraded pulley option takes the charger from 8 psi to 12 psi. It's $129 additional, but will add approx 40 HP.

4) DYNO AND INSTALLATION SERVICES - anyone interested in having THR install or dyno tune the vehicle will get DISCOUNTED pricing as a Mustang Forums member.

5) THE 5 OFF 5 DEAL - any one who orders one of these chargers will get a coupon code for 5% off your next 5 orders over $99 at www.texashotrods.com .

6) DECALS - anyone interested in flying the THR banner will be offered a free texashotrods.com decal if you purchase the charger.

For those of you that have already purchased, these offers apply to you! Send us a PM or email sales@texashotrods.com and we'll take care of you right away!

THANKS AGAIN!

definitely pm me plz, thank you

Believe we've PMed everyone up to this point? Let us know if you need the price!

ORIGINAL: texashotrods

Believe we've PMed everyone up to this point? Let us know if you need the price!


I would definitely be interested to know the price. I live in Canada. Please PM me too.

Is 12psi safe for this engine?

Hello Everyone!

Those interested in purchasing directly from our website, here's the link w/ the upgraded pulley option....

http://www.texashotrods.com/storefrontprofiles/DeluxeSFItemDetail.aspx?sid=1&sfid=70952&c=72737&i=88662146

Please PM us for the coupon code to get the appropriate discount.

Thanks!

can you pm me a price

THR can you PM me a price.

Can you please PM me the price. THANK YOU.

Can you please PM me the price? Thanks

Please PM price.

Thanks!

Thanks guys so much for the great response! Keep a look out for future promotions exclusively for the Mustang Forums community! If there is anyone that missed out, give us a buzz! Otherwise, THANKS AGAIN!!

May I ask what the price was now that it is over?

Guess I'm a little late but if anyone has any questions about this blower, or wants to know what it's potential is, feel free to post here or pm me. I've pretty much got it dialed in. I also know where to get pulleys and intercooler upgrades specifically for this model.
I'm making 408 rwhp with 411 torque.

ORIGINAL: ShadowDrake

Price PM's sent up till now, gonna take a break from it, I've easily sent over 20 PM's now [8D] If you want the price, do like I did and e-mail THR!

02GT, the guy in that thread who said it wouldn't fit under the stock hood was one of the guys who came in here asking if it would fit. Birdieman has some credit, but I do believe it will fit under the stock hood. It's a small blower. The Series V however, very likely not, but Saleen designed the Series IV kit for a stock 2v GT and when I was e-mailing them a while ago about it they said the kit has everything you need, nothing extra is necessary (meaning no need for a new hood).


I've got the series IV. and technically, NO it will NOT FIT UNDER THE STOCK HOOD. Atleast, not the way you would expect it to. you have to remove, atleast part of the heat shield. There is no way to avoid this, The belt/pulley at the end of the snout will cause friction with the heat shield.
What's worse is that after removing this small portion of heat shield, i had a problem where the paint spider cracked because of the heat. This is just in front of the scoop so it is a noticeable area for any people that are really picky however noone else but me seems to notice it unless I point it out. This happened after alot of hard driving. I've got no plans to change the hood right now though cause it's not that big of a deal.

ORIGINAL: ShadowDrake

ORIGINAL: The02GT

Damn the fee to get it for 12 months same as cash is almost $300, i might as well save up and pay the 4k for it vs almost paying the same amout to get it with their credit card!! But where exactly does the heat exchanger and intercooler go? I cant find any pics of it!!


The cooler is similar to that of the 03/04 Cobras. It sits in a bath of coolant just below the blower itself.


uhh, it doesn't sit in a bath. the intercooler is roughly 10 inches long, 4 inches wide and 4 inches deep, it's copper and made but garret. It has pretty tight fins. It has a tube that carries water through it but the water stays in the pipes. The heat is transfered to the metal fins from the air, and from the metal fins to the water, which is pumped along to cool off up front. There are two fittings that come out the back the internal heat exchanger (which sticks out of the back of the intake). The fittings are to hoses. One comes from the front heat exchanger, the other goes to the coolent resovoir which sits just next to your radiator. The coolant resovoir has a hose that goes to the pump which sits inside your front bumper next to the front heat exchanger. There is one fuse in the system as well. The pump turns on roughly 30 seconds after you power the car. There are also two fans that sit behind the front heat exchanger which sits directly in front of the radiator but down low. They make a steady hum when they are active.

ORIGINAL: ironh19

Ok I was wondering before I make my final decision, what kind of MPGs are we looking at, would I be forced to use premium gas, and do I have to tap into the oil pan for this kit?


MPG would suffer slightly but you'd have a hell of alot more power. premium gas is recommended but if you're cheap, use regular and stay out of boost which is pretty easy (just don't floor it).
No need to tap the oil pan. This kit is self oiled. It has a tiny allen wrench type of screw in dip-stick on top. I think you change the oil maybe once every 50k miles. There are some care instructions on whipples site.

ORIGINAL: mustang_montana

ORIGINAL: The02GT

So can i put my accufab 70mm t/b on it?? And is there a place to tap into on the s/c for a boost gauge?? And how much Whp will i see with 4 psi? with 9??


you can use the t/b last i checked, and the boost gauge gets tapped into any intake vacuum line. you should see at least 350 at the wheels.


It'll actually take up to 75mm tb just fine.

350 to the wheels on stock boost will require atleast a cold air intake, a TB, a cat-back, and maybe an x-pipe. 330 is more realistic in stockish form. However, torque should be 340+

ORIGINAL: The02GT

Ok guys i am tired of looking around trying to find pics but does anyone know where i can get pics of a complete install or pics of EVERYTHING that comes with the kit????????? I still dont understand how the heat exchanger and intercooler works on these cars!!! mhelp me out!

EDIT: just found some new info - So does the heat exchanger act as a raidator and a external water pump pushes the water through that and then to the intercooler which is mounted right under the s/c and the air from the s/c blows over the intercooler???????? Did i get that right? I would still like more pics if possible though! And what the small external mounted tank for? a resivior?


This info is basically correct. Resovoir to pump, pump to front heat-exchanger, front heat-exchanger, to internal heat-exchanger(intercooler), Intercooler to resovoir.

just out of curiousity can someone pm me the price of this thing, even though its over

would i get more HP out of the saleen or the KB 2.1??

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=718841767&n=2

will it run like its one?

ORIGINAL: mattmoto441

would i get more HP out of the saleen or the KB 2.1??

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=718841767&n=2

will it run like its one?

kb. and no, that car has alot more stuff then just a saleen s/c. its probly not even a saleen. to fly by cobras like they are sitting still with a 2v, it takes alot.

ORIGINAL: wwmost


ORIGINAL: mattmoto441

would i get more HP out of the saleen or the KB 2.1??

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=718841767&n=2

will it run like its one?

kb. and no, that car has alot more stuff then just a saleen s/c. its probly not even a saleen. to fly by cobras like they are sitting still with a 2v, it takes alot.



its a saleen

http://i79.photobucket.com/albums/j122/mattmoto441/56b14b18.jpg

http://i79.photobucket.com/albums/j122/mattmoto441/new****045.jpg

http://i79.photobucket.com/albums/j122/mattmoto441/121942891_l.jpg

http://i79.photobucket.com/albums/j122/mattmoto441/6816c77b.jpg

ORIGINAL: The02GT

So can i put my accufab 70mm t/b on it?? And is there a place to tap into on the s/c for a boost gauge?? And how much Whp will i see with 4 psi? with 9??


DUDE!!! Do you listen? Or just wait for your turn to talk?

What kinda of price are we looking at on these?

Please PM me price.

edit: nm guess it's over...thats what I get for being MIA from forums for a while.

I have a '99 gt what all would I need to do, to put in a supercharger as far as upgrades to the stock engine and axles....?

whats the fukin price stop being ghey and let us know so we can have point to start bargaining with:)

you guys already have your charges so what are you worried about - protecting the deal that for us that we don't know exisits?!?!?


I dont think it was great of a deal anyway ( just my instinct)

Diddo on the E-mailing me the price thanks who ever!!!!!!!

should be unstickied if there isnt going to be another one. I would love to know what the price was though

What's needed besides the kit to make it work on an 03 GT 2V? (fuel pump, MAF, ignition?)

Its complete right down to the instructions.

OK GUYS! Saleen is FINALLY shipping these suckers again! So if you're interested, we'll reinstate our Group Buy through December 31st on these kits. Get them now, as they QUICKLY go back out of stock!! PM or give us a Call for UNBEATABLE pricing on these kits!

http://www.mustangforums.com/m_2407351/tm.htm (http://NEW THREAD)