Mach 1 Grill eliminator kit?
 

Hey guys, I was installing the mach 1 grill delete kit and have a question about a couple of the screws. I was wondering if anybody knew about what size the screws and if they are torque screws or not that secure the pony to the main body. we cant get the things off and don't know what size/and or type they are. Thanks alot for any helpful info.

RE: Mach 1 Grill eliminator kit?
 

Also if nothing else, does anybody know were to find instructions for the whole instalation online for the grill eliminator kit. Thanks.

RE: Mach 1 Grill eliminator kit?
 

Where did you get the grill delete? I'm looking for one, what's a good price/place to get them?

RE: Mach 1 Grill eliminator kit?
 

BTW, If the screws are the same for your kit as in the 03 cobra, go to: http://03cobra.net/html/modifications.html and look under hood emblem, he said he got his from pepboys, maybe that might be a good place to look. hope this helps

RE: Mach 1 Grill eliminator kit?
 

Thanks for the info, We are about to head into town to see if we can find one. Well I was looking to order both the chin spoiler and grill delete kit for the gt and found them in many places. Steeda makes them, mustangtuning.com has it, cdc (classic design concepts) has their version and they are all about equally priced. They say you can also get them on ebay for around 45-50, most of the other places are in the 50s to 60s range. I would recomend that you get the 3 piece instead of the two peice kit, the third small panel looks much better covering up the holes from the honeycomb grill. I got the 2 peice kit and wish I would have gotten the three. Well I hope that help, thanks again.

RE: Mach 1 Grill eliminator kit?
 

Thanks a lot man, and good luck with the install. I'm going to check and see about the 3 piece kits, BTW who makes a 3 piece kit as compared to the 2 piece one? And is there a difference in price?

RE: Mach 1 Grill eliminator kit?
 

I think Steeda and CDC make the three peice kit. The 3 piece kits run 15-20 bucks more than the 2s and are about 50-60$s. Hope that helps!

RE: Mach 1 Grill eliminator kit?
 

this is the cheapest 3 piece that i have seen so far and about the 2 pice ones the 3 piece cover up better so they look nicer (so i think) heres the link http://www.latemodelrestoration.com/...0%201&comp=LRS

RE: Mach 1 Grill eliminator kit?
 

Does anyone have good pics of a 2 piece kit installed?

RE: Mach 1 Grill eliminator kit?
 

Here you go.....

http://myspace-331.vo.llnwd.net/0125...54386331_l.jpg