idk, i really really like the way meguiar's NXT wax looks. the few mother's products i've tried haven't really satisfied me, so i usually go with meguiar's stuff over them. i think most of their stuff looks better
doesnt look any harder than waxing, never done it, planning on doing the wash, clay, wax stuff thursday. pick a 18x18 area, spray it with the lubercation spray, then take the clay and slide it along in that area. You should be able to tell when its perfectly clean in that area when the clay perfectly slips along. add spray as needed(if in doubt to much is good), and fold the clay when it gets dirty. wipe the area with a mirofiber towel, and continue to the next spot.
If you drop the clay on the ground, chunk it in the trash.
Only think I dont know now is if you do the clay bar before using a the meguiars cleaner wax, or if it really matters the order before using the meguiars nxt wax EDIT: Found my answer on another post
< Message edited by 01yellowgt -- 7/11/2006 8:19:33 PM >
_____________________________
Best run: 13.477@100.46 NA Mod's: CAI, TB and Plenum, 4:10's Spec clutch, AFW, u/d pulleys, MGW shifter, SCT xcal tuner, LMII's, prochamber, NX plate kit
Printable Version
Car Show coming up - recommendations wanted - 
