convertible top electronics
Login  | |
|
convertible top electronics - 6/11/2004 10:20:48 AM
|
|
|
YinYangStang
Posts: 346
Joined: 3/24/2004
Status: offline
|
Ok, my dad has a 2002 Chrysler Sebring JTC...sigh, I know. Anyway, the one cool thing about his convertible is that when you press the one button to put the top down, all the windows go down as well. When you raise the top, you still have to raise the windows separately, but that makes sense so you can raise em after the tops up to get a good fit.
Long story short, I'd like to make my car do that. Has anyone tried this, or know how to do it? I was thinking I just had to find a way to tap into the wires sending power to the windows and connect them to the down part of the convertible top button...any ideas anyone?
_____________________________
On order:
Lowering springs, flowmaster, some badges.
|
|
|
|
|
|
|
RE: convertible top electronics - 6/11/2004 12:29:56 PM
|
|
|
tripsevn7
reads with an accent
Posts: 4231
Joined: 7/4/2003
From: New Orleans La
Status: offline
|
you will need a relay to make it work.. you will have to tap the main window power leads(kick panel drivers side) and use a relay to complete the loop. its possible to do, let me see if i can find my specs and i will give you the exact way to do it
_____________________________
|
|
|
|
|
Printable Version
