joshs21

I've got an 01 V6 that I've had for a while now. When the 2003 V6's came out with the GT hood scoops for the pony package I was pretty jealous. What is the best way to go about getting a GT hood scoop put on my 01 V6?

Marc_03GT

You do know the scoop is not operational, right? If your gonna get the scoop pay the extra money and get a shaker system. They cost about $1200...and you can either use the stock hood and cut a hole in it or you can spend about $700 on a new hood with the hole already in it. But I wouldn't get a fake hoodscoop added aftermarket.

-Marc

PS. If you just HAVE to have the fake one call your local ford dealership and ask them.

__________________
-Marc
2003 GT

mdgosch

Just to give you some insight...the scoop can be pain in the ass when washing it. Water likes to get trapped up in the honeycombs. After you dry the whole car and let it sit for a couple hours you look and there is a nice water stain running from the scoop all the way down the hood. Drives me nuts!! Sorry had to vent...lol

__________________

2004 GT
Stock 226hp 260
Magnaflow X-pipe w/cats
Bassani Catback
Dyno 2 239hp 281ft/lbs
KB 9psi intercooled kit
90maf
Dyno 3 381hp 407 ft

propellerhead

Don't forget to swap out the side scoops too.

__________________
2004 Mustang GT (1 of 8,000,000+)
http://www.cardomain.com/id/propellerhead

joshs21

Thanks for the input guys, I think I found what I was looking for. Here's the link. Let me know if you think it's the right one.

http://www.classicdesignconcepts.com...splay/545.html

propellerhead

I remember seeing a white late model V6 like mine. It had a black GT hood scoop like the one you linked. It looked pretty sweet.

__________________
2004 Mustang GT (1 of 8,000,000+)
http://www.cardomain.com/id/propellerhead

SCARFACE

I recomend that you get it profesionally intalled I f***ed mine on my old 00 v6 I had, well it wasn't that bad but just a little crooked.

__________________

"All I have in this world is my word and my ball's, and I don't break them for no one!!..."

joshs21

I'm definately going to have it professionaly installed, I was just wondering if it was the same scoop that comes factory on the GTs.

2k1gt

All you need to do it take a few paper towels to the honeycomb stuff and it all gets sucked up. Its an easy fix.

__________________

Magnaflows, Mac H-pipe, Densecharger, C&L Plenum, 75mm TB, Steeda Underdrive Pulleys

jdaniel

yeap... thats what I do!