4eyedfreak

1st, I would like to know where most of you, if any hang your ds loop? I was wondering because im thinking about putting it as close to the tranny as possible...meaning about 7 inchs back from the spline on the shaft, but im still wondering...

2nd, i bought a oil pressure line last year that was cheesy plastic line and aside from a cooper line is there another...maybe something in the middle?

__________________
83 GT
306CI SMALL BLOCK
11.2 @ 120.2MPH (Now gone)

Looking for new project

4eyedfreak

COME ON TTT

__________________
83 GT
306CI SMALL BLOCK
11.2 @ 120.2MPH (Now gone)

Looking for new project

eaturls1

i have a 83 gt and i put ds loop about 6-7 inches from the tailshaft. i dont think there is another line except for an braided line. iw ould braided or copper. the plastic ones suck. if they break wich they are prone to do do to the high temps it will spray oil every were inside of car. thats is a mess.

Grimace5.0

I think per NHRA rules it has to be behind the trans, within 6" of the front u-joint. MAy want to double check though.

Grimace5.0

AutoMeter makes a braided steel line.

JD1969

I beleive that is coorect also.

__________________
GET IN THE RING!
RIP tripsevn7
4/1/77 - 7/27/08