another exhaust question

Printable Version

Mustang Forum >> Ford Mustang Tech >> 2005 - 2008 Mustangs >> 4.0L V6 Specific >> another exhaust question

Page: [1]

Login Message << Older Topic   Newer Topic >>

another exhaust question - 5/15/2006 3:54:04 PM    yurmom   Posts: 19 Joined: 5/2/2006 Status: offline i want to do a set up like this on my stang http://www.brenspeed.com/info/media/hwithslp.wmv its a pypes off-road h-pipe and slp loudmouth axle-backs i know that the sound will obviously be different on the 4.0, i was just wondering what you guys thought thanks Post #: 1

RE: another exhaust question - 5/15/2006 4:06:15 PM    ricanpassion Posts: 538 Joined: 4/21/2006 Status: offline The V6 will not sound like that...but there are different combinations you have to choose from...listen to clips and then see how much you want to spend.... Check this post out as it may help u with your decision.... http://www.mustangforums.com/m_1183819/tm.htm I have a true dual setup with cutom made H-pipe and Flowmasters SUper 40 Catbacks and I love the sound...it is all a matter of choice....here is a sample of mine: http://www.flowmastermufflers.com/40_super.html < Message edited by ricanpassion -- 5/15/2006 4:07:32 PM > _____________________________ TriBar fender ponies & spinners-GT Foglights/Grille-Billet accesories(Interior)-8" Black Rubber Stubby antenna-True Dual Super 40's CatBack w/ H-Pipe-C&L CAI+XCALII & more (in reply to yurmom) Post #: 2

RE: another exhaust question - 5/15/2006 4:14:47 PM    yurmom   Posts: 19 Joined: 5/2/2006 Status: offline hey ricanpassion, are your flowmasters axlebacks, or did you have them mounted in front of the axle? I'm kinda new to this, i thought that an h-pipe was put in place of the cats, could you just quickly explain how your system is set up? Thanks (in reply to ricanpassion) Post #: 3

RE: another exhaust question - 5/15/2006 4:31:28 PM    ricanpassion Posts: 538 Joined: 4/21/2006 Status: offline Mine are CatBacks (from catalytic converters to muffler)...Axle backs are just that from the rear axle back to the tips (basically just the mufflers)..here is a diagram that breaks it down a bit better This is an example of a axle-back diagram: http://www.flowmastermufflers.com/products/images/kitpdfs/17421.pdf This is an example of a Cat-back diagram: (But this is a kit that attaches/replaces the existing y-pipe with another Y-pipe) http://www.magnaflow.com/02product/parts/16605_lg.jpg This is another example of a cat-back design but using x-pipe: http://www.magnaflow.com/02product/parts/15485_lg.jpg An H-pipe is a crossover pipe that joins both independent exhausts after the Catalytic converters...look at this one and picture that: http://us.st11.yimg.com/us.st.yimg.com/I/rodi_1898_9741045 Hope that helps _____________________________ TriBar fender ponies & spinners-GT Foglights/Grille-Billet accesories(Interior)-8" Black Rubber Stubby antenna-True Dual Super 40's CatBack w/ H-Pipe-C&L CAI+XCALII & more (in reply to yurmom) Post #: 4

RE: another exhaust question - 5/15/2006 4:33:31 PM    ricanpassion Posts: 538 Joined: 4/21/2006 Status: offline Even though this is on the old 5.0...it explains the H-pipe setup: http://www.mustang50magazine.com/howto/22144/ Just keep in mind that our new stangs the mufflers are now underneath the rear bumper instead of mid-body(older mustangs) _____________________________ TriBar fender ponies & spinners-GT Foglights/Grille-Billet accesories(Interior)-8" Black Rubber Stubby antenna-True Dual Super 40's CatBack w/ H-Pipe-C&L CAI+XCALII & more (in reply to ricanpassion) Post #: 5

RE: another exhaust question - 5/15/2006 4:34:47 PM    yurmom   Posts: 19 Joined: 5/2/2006 Status: offline where did you go to get your exhaust work done and about how much did it cost for parts and labor? (in reply to ricanpassion) Post #: 6

RE: another exhaust question - 5/15/2006 4:40:32 PM    ricanpassion Posts: 538 Joined: 4/21/2006 Status: offline I went to my local Meineike after shopping online and locally, he was the cheapest for what I wanted...I paid $513 (Tax & labor included) and that was with picking up a tire for my friend's car too (-$40) so it actually cost me $473. Check locally first as they maybe able to save on s&H and may do it all custom & offer warranties...they also welded all of my exhaust (some don't like that as it eliminates the ease or removal if need be)...but I rather have my welded so all thos pesky little clamps do not rattle loose after a while! quote: ORIGINAL: yurmom where did you go to get your exhaust work done and about how much did it cost for parts and labor? _____________________________ TriBar fender ponies & spinners-GT Foglights/Grille-Billet accesories(Interior)-8" Black Rubber Stubby antenna-True Dual Super 40's CatBack w/ H-Pipe-C&L CAI+XCALII & more (in reply to yurmom) Post #: 7

Forum Rules & FAQ Today's Posts Most Active Topics RSS Feeds Make A Donation Mustangs: Classic Mustang Mustang II Fox Body Mustang sn95 Mustang New Edge Mustang s197 Mustang Mustang Clubs 2007 GT500 Mustang 2009 Mustang Ford Mustang Prices

Featured Sponsors

Advertising Info

Top 10 Posters
pro50sc 17922 nanaki 14685 88bluegt 14536 dan04cobra 14532 addermk2 14002 ride of the 13716 hotrods_n_bo 13329 2000gt4.6 12516 mustangman02 11994 1slo85 11751

New Vendors
Extreme Dimension
BMR Fabrication
Year One
Auto Badges
Trickflow
Speedware Motorsports
LTM Global
Late Model Restoration
Southern Mustang Parts
BrandMotion