Team MF Member #007 Posts: 9928
Joined: 1/5/2004 From: My moms uterus Status: offline
quote:
ORIGINAL: 10seconds
Transmission is a t-3650 built by Spencer Trans, it has a Steeda tri-ax shifter, Kevlar Clutch, and yes, its doing 150mph 4th gear @6300 rpms, if it helps ill shoot another video but its hard because i dont like having anyone ride with me, as no matter what is said here, i try to concern myself with others safety when possible.
I didn't read all this, but how exactly did you stroke a 281 to a 418? And you still have the stock plenum?
I'd like to know if you have anything done to your suspension? It doesn't look lowered. Also the brakes look stock. I could be wrong but the only close up that could give me a clue had the rim blocking the most of the caliper. Coudn't tell if you upgraded the rotors either. If you didn't do any of this you really didn't think your car through or it could just be another thing for people to believe this is all BS. Don't care if I get a response or not. Just wanted to put my 2 cents in.
< Message edited by breyton -- 5/15/2006 8:39:08 PM >
_____________________________
Steeda Intake, MagnaFlow CatBack Exhaust, X-Pipe/No Cats, Diablo PCM, 2.8" Pulley, Lots Of Kenny Brown Suspension & Chassis Goodies
"I'm slow because I'm a short bus riding window licker."
Team MF Member #420 Posts: 14535
Joined: 7/24/2003 Status: offline
quote:
ORIGINAL: 10seconds
Now i cant say much, because it would prolly get me in trouble but here it is, 4th gear, 150mph, Downtown in traffic, never could go to fifth or shoot the juice, just too many cars on the road, short clip here.
Transmission is a t-3650 built by Spencer Trans, it has a Steeda tri-ax shifter, Kevlar Clutch, and yes, its doing 150mph 4th gear @6300 rpms, if it helps ill shoot another video but its hard because i dont like having anyone ride with me, as no matter what is said here, i try to concern myself with others safety when possible.
I didn't read all this, but how exactly did you stroke a 281 to a 418? And you still have the stock plenum?
You really should read all the posts Sidewayz... you'll get a good laugh out of it. Just do yourself a favor and wear some waders, because the BS gets real deep in his posts.
Team MF Member #2046 Posts: 12516
Joined: 1/22/2004 From: United States Status: offline
quote:
ORIGINAL: Sidewayz6.0
quote:
ORIGINAL: 10seconds
Transmission is a t-3650 built by Spencer Trans, it has a Steeda tri-ax shifter, Kevlar Clutch, and yes, its doing 150mph 4th gear @6300 rpms, if it helps ill shoot another video but its hard because i dont like having anyone ride with me, as no matter what is said here, i try to concern myself with others safety when possible.
I didn't read all this, but how exactly did you stroke a 281 to a 418? And you still have the stock plenum?
+1. The first time I posted I skipped over the pictures. So far as I know, the only engine ford makes that there are 418 strokers for is 351s. Now unless someone managed to hook up a 4.6 upper intake to a 351 stroker....
P O S E R
U R owned. Delete your account, cancel your internet connection, format your computer, put it in the passenger seat of your POS ghetto ram, and then drive them both off a cliff.
Also, don't wear your seatbelt while doing this.
EDIT: Also, who the hell puts nitrous on a sea doo? Where do you stash the bottle? What is the point again??
< Message edited by 2000GT4.6 -- 5/15/2006 4:40:14 PM >
Computer Geek, how c@n I h3lp u? Posts: 14694
Joined: 8/23/2004 Status: offline
quote:
ORIGINAL: 2000GT4.6
quote:
ORIGINAL: Sidewayz6.0
quote:
ORIGINAL: 10seconds
Transmission is a t-3650 built by Spencer Trans, it has a Steeda tri-ax shifter, Kevlar Clutch, and yes, its doing 150mph 4th gear @6300 rpms, if it helps ill shoot another video but its hard because i dont like having anyone ride with me, as no matter what is said here, i try to concern myself with others safety when possible.
I didn't read all this, but how exactly did you stroke a 281 to a 418? And you still have the stock plenum?
+1. The first time I posted I skipped over the pictures. So far as I know, the only engine ford makes that there are 418 strokers for is 351s. Now unless someone managed to hook up a 4.6 upper intake to a 351 stroker....
P O S E R
U R owned. Delete your account, cancel your internet connection, format your computer, put it in the passenger seat of your POS ghetto ram, and then drive them both off a cliff.
Also, don't wear your seatbelt while doing this.
EDIT: Also, who the hell puts nitrous on a sea doo? Where do you stash the bottle? What is the point again??
no. the guy that sold him the car said those were all the mods, so it must be true! the guy selling the car actually took a loss at 50k and actually put like 100k into the car.
Printable Version
RE: 150MPH in Traffic VIDEO! - 
...damn peer pressure.
