I'm getting my 98gt back up to snuff and have recently found out that after my front end was repaired the caster/camber is out about a half degree and is actually about a 1/4inch off in measurments from side to center and vice versa. My question is can I install only ONE caster camber plate/kit on the left side that needs to be adjusted, it will be able to align my problems and move the caster/camber in place. However, if I install only one is this going to lead me to problems with differences in measurments on both sides, ie. strut height etc. I am pretty new at these kits and haven't had much experience.
Any suggestions would be great.
Thnx
Sean Buehler
Buehlers@erau.edu
After accident/ Caster/Camber kit one side?
